Convert Picoamperes per square metre to Femtoamperes per square metre

Convert Picoamperes per square metre (pA/m²) to Femtoamperes per square metre (fA/m²) instantly and accurately.

Conversion Formula

fA/m² = pA/m² × 1000

About Picoamperes per square metre

The picoampere per square metre (pA/m²) equals 10⁻¹² A/m². Reverse-bias dark current density in silicon p-n junctions at room temperature is 1-100 pA/m²; gate leakage current density in sub-22 nm CMOS transistors spans pA/m² to nA/m²; dark current density of cooled InGaAs photodiodes is in the pA/m² range. 1 pA/m² = 10⁻¹² A/m² = 10⁻³ nA/m².

About Femtoamperes per square metre

The femtoampere per square metre (fA/m²) equals 10⁻¹⁵ A/m². Leakage current density through the dielectric of a high-quality capacitor at rated voltage is in the fA/m² range; dark current density in cooled CCD image sensors at -30 °C is around 1-10 fA/m²; radiation-induced leakage in neutron-irradiated MOS gate oxides is measured in fA/m². 1 fA/m² = 10⁻¹⁵ A/m² = 10⁻³ pA/m².

Quick Reference Table

→ Full Current Density Converter