Convert Dyne centimetres to Kilonewton metres
Convert Dyne centimetres (dyn·cm) to Kilonewton metres (kN·m) instantly and accurately.
Conversion Formula
kN·m = dyn·cm × 1.000000000e-10
About Dyne centimetres
The dyne centimetre (dyn·cm) is the CGS unit of torque, equal to 10⁻⁷ N·m. It represents 1 dyne of force applied at 1 cm from the axis. MEMS micro-actuator friction, watch escapement detent torques, and laboratory torsion-pendulum experiments are measured in dyn·cm. Pre-SI physics literature and precision galvanometer calibration reports used this unit. 1 dyn·cm = 10⁻⁷ N·m = 0.01 gf·mm = 0.001 gf·cm.
About Kilonewton metres
The kilonewton metre (kN·m) equals 1000 N·m, the standard unit for structural and civil engineering bending moments and large-machine torques. Steel beam connection bolts, industrial gearbox output shafts, ship propeller shaft flanges, and large AC induction motor ratings are specified in kN·m. Wind turbine mainshaft torques reach 1-10 MN·m. 1 kN·m = 1000 N·m ≈ 737.6 lbf·ft ≈ 0.7376 kip·ft ≈ 102.0 kgf·m.
Quick Reference Table
| Dyne centimetres (dyn·cm) | Kilonewton metres (kN·m) |
|---|---|
| 1 dyn·cm | 1 × 10-10 kN·m |
| 2 dyn·cm | 2 × 10-10 kN·m |
| 5 dyn·cm | 5 × 10-10 kN·m |
| 10 dyn·cm | 1 × 10-9 kN·m |
| 25 dyn·cm | 2.5 × 10-9 kN·m |
| 50 dyn·cm | 5 × 10-9 kN·m |
| 100 dyn·cm | 1 × 10-8 kN·m |