Convert Kilogram-force centimetres to Newton millimetres
Convert Kilogram-force centimetres (kgf·cm) to Newton millimetres (N·mm) instantly and accurately.
Conversion Formula
N·mm = kgf·cm × 98.0665
About Kilogram-force centimetres
The kilogram-force centimetre (kgf·cm) equals exactly 9.80665 × 10⁻² N·m, common in Continental European and Asian servo drive engineering. ABB, Siemens, and Yaskawa servo catalogs specify rotor and reflected-load torques in kgf·cm; IEC 61800 drive inertia-ratio sizing uses kgf·cm. Typical industrial servomotor stall torques: 0.1-50 kgf·cm. 1 kgf·cm = 0.0980665 N·m = 100 gf·cm ≈ 13.89 ozf·in.
About Newton millimetres
The newton millimetre (N·mm) equals 10⁻³ N·m, widely used in mechanical engineering and FEA software. ANSYS, Abaqus, and Siemens NX models built in millimetres report torques in N·mm for dimensional consistency. Fastener torque for M3-M6 screws (typically 0.3-5 N·m range), micro-pump impeller loads, and precision gearbox calibration values are expressed in N·mm. 1 N·mm = 10⁻³ N·m = 0.1 N·cm ≈ 8.851 × 10⁻³ lbf·in.
Quick Reference Table
| Kilogram-force centimetres (kgf·cm) | Newton millimetres (N·mm) |
|---|---|
| 1 kgf·cm | 98.0665 N·mm |
| 2 kgf·cm | 196.133 N·mm |
| 5 kgf·cm | 490.333 N·mm |
| 10 kgf·cm | 980.665 N·mm |
| 25 kgf·cm | 2451.66 N·mm |
| 50 kgf·cm | 4903.32 N·mm |
| 100 kgf·cm | 9806.65 N·mm |