Convert Dots per point to Pixels per foot

Convert Dots per point (dot/pt) to Pixels per foot (px/ft) instantly and accurately.

Conversion Formula

px/ft = dot/pt × 864

About Dots per point

The dot per point (dot/pt) expresses output resolution relative to the PostScript point - exactly 1/72 inch, codified by Adobe in the PostScript Language Reference (1985). The Apple Macintosh 128K (1984) ran its built-in CRT at exactly 72 DPI, placing 1 dot per point - an intentional WYSIWYG design: a 12-point character on screen measured 12 pixels tall and printed at 12 points on the Apple LaserWriter. Device resolution milestones: Apple LaserWriter (1985) 300 DPI = 300/72 ≈ 4.17 dot/pt; HP LaserJet 4 (1992) 600 DPI ≈ 8.33 dot/pt; Linotronic 300 imagesetter (1985) 1270 DPI ≈ 17.64 dot/pt; Agfa Selectset 5000 at 2400 DPI = 33.33 dot/pt. TrueType and OpenType font hinting instructions align outline points to raster device pixels at the current dot/pt ratio. The CSS pt unit equals the PostScript point: 1 CSS pt = 1/72 CSS in = 4/3 CSS px at 1 dppx. 1 dot/pt = 72 DPI = 72 PPI.

About Pixels per foot

The pixel per foot (px/ft) is an imperial resolution unit used in architectural visualisation, large-format display engineering, and document scanning where distances are measured in feet. The foot is exactly 0.3048 m = 12 in (international foot, 1959), giving 1 px/ft = 1/12 PPI ≈ 0.08333 PPI. Microfilm scanners for engineering drawing digitisation (ANSI/AIIM MS23) are specified in px/ft; a 200 px/ft scan of a 24-inch D-size drawing yields 400 pixels across the 2-foot width. Outdoor LED walls at P6 pixel pitch (6 mm) covering one foot ≈ 50.8 px/ft. Building plans at 1:48 scale reduce 1 actual foot to 0.25 in on paper, requiring ≥ 3 px/ft for legibility. 1 px/ft = 1/12 PPI ≈ 0.083333 PPI ≈ 3.281 px/m.

Quick Reference Table

→ Full Image Resolution Converter