Convert Bels to Centibels

Convert Bels (B) to Centibels (cB) instantly and accurately.

Conversion Formula

cB = B × 100

About Bels

The bel (B) is the original logarithmic unit of sound and signal level, defined as a tenfold power ratio: L = log₁₀(P₁/P₂) bels, or for field quantities L = 2 × log₁₀(A₁/A₂) bels. Introduced at Bell Telephone Laboratories in the 1920s and named in honour of Alexander Graham Bell (1847–1922), the bel was used to quantify telephone transmission line attenuation: 1 bel of loss meant output power was 1/10 of input. Because 1 bel represents a tenfold change - far too coarse for grading (even untrained listeners can detect a 1 dB = 0.1 B change) - the decibel replaced it in virtually all practical use. Key reference points: 0 B = equal-level reference; 3 B = 30 dB (1000:1 power ratio); 6 B = 60 dB (normal speech at 1 m); 12 B = 120 dB (pain threshold). A 1 B (10 dB) increase in SPL roughly doubles perceived loudness (Stevens’s power law at moderate intensities). 1 B = 10 dB = ln(10)/2 Np ≈ 1.151293 Np.

About Centibels

The centibel (cB) is one-hundredth of a bel (1 cB = 0.01 B = 0.1 dB), equal to exactly one-tenth of a decibel. This resolution is the standard for clinical audiometry and professional audio equipment. The pure-tone audiogram (ISO 8253-1, ANSI S3.21) records hearing thresholds at 5 dB (50 cB) steps for screening, but research audiometers adjust in 0.25 dB (2.5 cB) steps for precise threshold measurement. The human just-noticeable difference (JND) for loudness of a 1 kHz tone at 70 dB SPL is ≈ 1–3 cB (Moore, 2012), rising to 5–10 cB near the absolute hearing threshold. IEC 60268-5 specifications for loudspeakers require frequency response plots with centibel (0.1 dB) resolution. In studio monitor calibration (SMPTE RP 200, ITU-R BS.1116), loudspeaker level matching is verified to within 0.1 dB (1 cB). 1 cB = 0.01 B = 0.1 dB ≈ 0.011513 Np.

Quick Reference Table

→ Full Sound Level Converter